Nachi FD11 Error E9003
You could use the Attachments and Upload. Actual program is to be attached, not picturesrobot-forum.com/attachment/37683/
View ArticleNachi MZ07 Edit program on pc
"FDonDeskII Light" is free software supplied with the MZ robot. Check with your robot supplier.
View ArticleDifference between Machine Coordinate System and World Coordinate System?
Robot coordinate movement will be to the robot's base, while World coordinates will be to the Robot installation angle, defined in Constant Setting->Format and Configuration->Installation Angle....
View ArticleOperational history display in service utilites missing
Never mind about this one, i was able to reach out to Nachi and they informed me, there isn't a way to hide it outside of the levels of access, but due to the revision level of the software it wasnt...
View ArticleADD COMMENTS TO POSE FILE USING NACHI TEACHING PENDANT
Quote I need to add comments to the pose files using (NACHI MZ25-0) teaching pendants. Is there any way to do it? You could use the Teach Pendant to Write Comments for the pose file in the ASCII file...
View ArticleAllocation to a Station error - OTC FDNB6 Robot
Hello @MOM, I sorted the issue out. The Cell was setup with the Robot has UNIT 6 and the program was giving me that error because the Operation Constants and in Condition for Multi station starter, I...
View ArticleNachi Communication: Backup Dll Library
I spoke with some integrator which suggests to do it over Socket communication instead of licensed OpenNR.Some program must be running in background on controller in order to send required data to...
View ArticleRoll Pitch Yaw in NACHI robot
Quote from MOM Then the matrix would look like this (see rotation matrix)robot-forum.com/attachment/38908/If we are very close to pitch = 90 deg then we get this...
View ArticleCode error Nachi Robot
Code Buenas tardes, me pueden ayudar con un código de error que no aparece en el manual, es E1118, ya he probado el interruptor de seguridad y está ok, paradas de emergencia ok.... Gracias.
View ArticleNachi firmware
Does anyone know where to find the firmware version on a nachi cz10. Thanks.
View ArticleHow to kill usertask on CFDs controller
Hi,I have an MZ10LF with a CFDs controller.I've found the instruction KILLMCR but sometimes it doesn't end the opened usertasks (virtual and real controller).Does anyone know another way to end a...
View ArticleErro E0078 CPU Board power fault
hello my friendsWe have a Robo Nachi and it is showing fault E0078'' Error occurs when the power of the CPU becomes 10% or less check the power supply unit, or exchange the Power supply unit ''and we...
View ArticleFD11 teach pendant thumbwheel
I found my own answer elsewhere, but figured i would put it on here in case anyone in the future goes looking for it as well. It is also called the JOG DIAL in the manuals, and because of that i found...
View ArticleOffline files in FD_ONDESK that detail the standard I/O assignments?
Use the IO assignment file " S00SIGL.CON" in the WORK folder.
View ArticleOTC FD19 controller
hello!I have a couple of questions.Is it possible to extrapolate the current date from controller?if it were possible I should then associate a variable with the date which, when it takes on the same...
View ArticleSOCKET COMMUNICATION WITH VISION SYSTEM
Hi, i have an MZ10LF-01 robot and i'm trying to connect it with a IDS camera, im doing an user Task to use socket communication, the vision system programmed in Pyhton sends the coordinate desire...
View Article
